30
TroubleshootingGuide Models QS12 & QS24
PROBLEM PROBABLE CAUSE REMEDY
6. Product is under-cooked,
overcooked, or cooking
unevenly.
a. Release material sheet is
worn.
a. Replace the release material
sheet.
b. Incorrect cooking time. b. Adjust cook time accordingly.
c. Incorrect temperat ure setting. c. Adjust tem perature setting.
d. Incorrect gap setting. d. Adjust gap.
e. Heat zone not heating. e. Cont act service technician.
f. Upper cook surface has carbon
build-up.
f. Closing procedures must be
followed to remove carbon
build-up.
g. Incorrect temperature
calibration.
g. Calibrate the grill accordingly.
h. Cook surfaces are not parallel. h. Call a serv ice technician to
level the grill or refer to leveling
procedure in front of manual.
i. Incorrect item selected. i. Select proper item .
7. Control is displaying fault. a. Refer to “fault screens”,
page 17.
a. Clear the fault. If ac tion is
ineffective, contact service
technician.
8. Grease drips from under the
grease drawer.
a. Grease tray is full. a. Empty the grease tray.
9. The grease drawer will not
close.
a. Product has built up in back of
grease partition.
a. Refer to “Cleaning the Grease
Tray Partition” instructions.