Carrier Container Refrigeration Unit Section Dataview Program Instructions, Desktop Computer

SECTION 3

DATAVIEW PROGRAM INSTRUCTIONS

NOTE

The following is a copy of the software program at time of printing. If loading only one program (12-00413 reciprocating unit interrogation or 12-00528 scroll unit interrogation program) the pro- gram disc instructions may be followed as written. If loading both programs on the same computer, different resident directories must be created Where these differences exist, annotation has been add- ed to the text provided herein.

Refer to the manual Table of Contents for a listing of the following Topics and the material provided under the topic heading.

TOPIC 1 SYSTEM REQUIREMENTS

This section describes the PC and printer system requirements for the DOS DataView interrogator program.

Desktop Computer

1.MS-DOS compatible computer with an 80186 or higher microprocessor.

2.A hard-disk system (Or hard-disk emulation with electronic memory).

3.MS-DOS version 3.3 or higher.

4.A minimum of 640KB free System Memory (RAM).

5.A minimum of 3MB free hard-disk space.

6.One 3.5-inch disk drive. If the system has one diskette drive it will have a drive designator of A. If the system is configured with two diskette drives the second drive will be designated as B.

7.One Serial Port not dedicated to a FAX-Modem.

8.One of the following ports available for a printing;

Serial port Parallel port Network Connection

9. Serial to serial, serial to parallel, or parallel to parallel printer cable.

HP Palmtop Computer

1.MS-DOS compatible computer with an 80186 or higher microprocessor.

2.MS-DOS version 3.3 or higher.

3.A minimum of 640KB free System Memory (RAM).

4.A minimum of 3MB ROM free space available.

5.One RS-232 serial port.

6.Connectivity Pack to transfer/receive files from a desktop computer to/from the HP Palmtop computer.

7.Serial to serial or serial to parallel printer cable.

Pen-Based Computer

1.MS-DOS compatible computer with an 80186 or higher microprocessor.

2.MS-DOS version 3.3 or higher.

3.A minimum of 640KB free System Memory (RAM).

4.A minimum of 3MB ROM free space available.

5.Optional 3.5 floppy disk drive.

6.One RS-232 serial port.

7.Optional parallel port.

8.Serial to serial, serial to parallel, or parallel to parallel printer cable.

3-1 62-02575-07