Carrier Container Refrigeration Unit Control Parameters, Compressor Hour Meter, Configuration

Control Parameters

The following screen is displayed for the user to view and modify the current settings of the controller user selectable parameters.

The following is a summary of the options available in Controller Parameters.

<D> Defrost Interval - Allows the user to view and modify the automatic defrost interval.

<U> Units - Allows the user to view and modify the temperature units which are used when displaying controller temperature sensors.

<M> Shutdown Mode - Allows the user to view and modify how the refrigeration unit will shutdown.

<R> In-Range Band - Allows the user to view and modify the in-range band width of the control temperature sensor. <C> Current Limit - Allows the user to view and modify the refrigeration unit’s current limit setting.

<T> Stagger Start - Allows the user to view and modify the stagger start time of the refrigeration unit.

<S> Send - Allows the user to send the parameter changes to the controller. Upon completion the DataView program informs the user that the parameters have been successfully sent.

<H> Help - Displays the help screen.

<ESC> Cancel - Cancels all settings and returns the user to the System Tools Screen.

Compressor Hour Meter

This feature allows the user to view the compressor run time.

Configuration

This will allow the user to select the controller configuration required by a particular model or to customize a models configuration. For further information, refer to TOPIC 11.

3-13 62-02575-07