Carrier KH_233P, KH_123P manual Tips Before Installation, Power Supply Cord, Unit Operation Hazard

Models: KC_141P KH_233P KC_223P KC_233P KC_183P KH_123P

1 48
Download 48 pages 60.16 Kb
Page 5
Image 5

TIPS BEFORE INSTALLATION

!CAUTION

UNIT OPERATION HAZARD

Failure to follow this caution may result in damage to unit components.

To avoid installation/operating difficulties, read the instructions thoroughly.

Your Room Air Conditioner unit is designed to be highly efficient and save energy. Follow these recommendations for greater efficiency.

1.Select thermostat setting that suits your comfort needs and leave the thermostat at that chosen setting.

2.The air filter is very efficient in removing airborne particles. Keep the air filter clean. Typically, the filter should be cleaned once a month. More frequent cleaning may be necessary depending on outdoor and indoor air quality.

3.Use drapes, curtains, or shades to keep direct sunlight from heating your room, but DO NOT obstruct the air conditioner. Allow air to circulate around the unit without obstructions.

4.Start your air conditioner before outdoor air becomes hot/cold and uncomfortable. This avoids an initial period of discomfort while the unit is cooling or heating off the room.

5.When outdoor temperature is cool enough, use HIGH or LOW FAN only. This circulates indoor air, providing some cooling comfort, and utilizes less electricity than when operating on a cooling setting.

Your Room Air Conditioner was designed for easy installation in a single or double-hung window.

NOTE: This unit is NOT designed for vertical (slider type) windows.

POWER SUPPLY CORD

This room air conditioner is equipped with a protective power supply cord that senses current leakage (see Fig. 3). Unit power is automatically disconnected when unsafe conditions are detected.

To test the power supply cord:

1.Plug power supply cord into a grounded 3-prong outlet

2.Press RESET.

3.Press TEST (listen for click; RESET button will trip and pop out).

4.Press and release RESET (listen for click; RESET button will latch and remain in). The power supply cord is ready for operation.

The Reset button must be pushed in for proper operation.

The power supply cord must be replaced if the RESET button fails to trip when the test button is pressed or fails to reset. A damaged power supply cord must be replaced with a new power supply cord obtained from the product manufacturer. The damaged cord MUST NOT be repaired.

Do not use the power supply cord as an off/on switch. The power supply cord is designed as a protective device.

The power supply cord contains no serviceable parts. Opening the tamper-resistant case voids all warranty and performance claims.

TEST

RESET

A06531

Fig. 3 ---Power Supply Cord

NOTE: Save the shipping carton and packing materials for future storage or transport of the unit. Please check the contents of the hardware kit against the corresponding model check list, prior to installation of the unit. See lists below in Fig. 4.

3/4”Screws (10)

Shutter Clamp(2)

 

1/4”Screws (23)

Washer(10)

 

Top Channel(1)

Side Curtain RH(1)

Bottom Channel(1)

Side Curtain LH(1)

(For 10K to 12K models)

 

Bottom Channel(1)

 

(For 14K to 23K models)

 

---Factory Installed)

 

Lock Washers(4)

 

1---1/2”x1/4 Bolts(4)

Seal(1)

 

1/4” Nuts(4)

 

 

Foam (1)

Mounting

Double

Brackets(2)

Angle

Adhering

Brackets(2)

Seal(1)

End Cap &

Leveling Legs(2)

A06532

Fig. 4 ---Installation Hardware

NOTE: Surplus screw(s) for spare use.

Tools needed for window installation

SScrew drivers: both Phillips and flat head S Power drill: 1/8 inch diameter drill bit

SPencil

SMeasuring tape

SScissors

SCarpenters level

5

Page 5
Image 5
Carrier KH_233P, KH_123P, KC_183P, KC_233P, KC_223P manual Tips Before Installation, Power Supply Cord, Unit Operation Hazard

KC_141P, KH_233P, KC_223P, KC_233P, KC_183P specifications

Carrier has made significant strides in the HVAC industry with its innovative series of air conditioning systems, particularly the KH_123P, KC_183P, KC_233P, KC_223P, and KH_233P models. These models are a testament to Carrier's commitment to delivering advanced technology, energy efficiency, and enhanced comfort in climate control.

The KH_123P model is a compact ductless system that provides effective cooling and heating solutions for residential spaces. With its sleek design, it seamlessly integrates into any home decor. The unit features advanced inverter technology, allowing for variable speed operation that adjusts to the cooling demand, significantly reducing energy consumption. It also boasts low ambient cooling capability, making it ideal for use in various climates.

Next, the KC_183P and KC_233P models are designed for medium to large spaces, providing powerful climate control with a focus on quiet operation. Both models are equipped with high-efficiency scroll compressors that ensure reliable performance while minimizing noise levels. Additionally, these units feature multiple fan speeds and advanced air filtration systems, which improve indoor air quality by capturing dust, allergens, and other pollutants.

The KC_223P model stands out for its smart technology integration. It supports Wi-Fi connectivity, allowing users to control the system remotely via a smartphone app. This feature enables scheduling, temperature adjustments, and monitoring of energy usage from virtually anywhere. The KC_223P also includes precise temperature control and zoning capability, creating comfort zones tailored to individual preferences throughout the home or office.

The KH_233P model further enhances energy efficiency with its EcoMode setting, which optimizes performance for lower energy consumption during periods of low activity. This model is also equipped with advanced diagnostics and self-cleaning functions, reducing maintenance needs and extending the unit's lifespan.

All of these Carrier models come with a robust warranty and are backed by Carrier’s storied reputation for quality and innovation. With their blend of advanced technology, efficiency, and user-friendly features, the KH_123P, KC_183P, KC_233P, KC_223P, and KH_233P systems are stellar choices for anyone looking to enhance their indoor climate comfort. Carrier continues to set the standard in the HVAC sector through these versatile and high-performing solutions.