4Thermostat mode is Cool
5Thermostat mode is Heat
6Thermostat mode is emergency heat
7Fahrenheit
8Celsius
9Battery strength indicator
10Aux Heat is On
11Compressor is On (if flashing, it is waiting to come on)
12Current setpoint (if configured to display room temp)
Setting the temperatures for heating and cooling
Your thermostat is installed with the heating set at 68_F and the cooling set at 72_F. You can use these or change them so your room is as warm or as cool as you would like it to be. These steps will hold the temperature where you set it.
1.To change the heating temperature, press the mode button on the left until the screen says heat.
2.Press the up or down button located on the right side of the display until you reach the desired temperature.
3.To change the cooling temperature, press the mode button on the left until the screen says cool.
4.Press the up or down button located on the right side of the display until you reach the desired temperature.
Using the fan
When the fan is on, it helps distribute air for a more even temperature in all spaces. You can set the thermostat so the fan runs continuously (on) or only
20
