Cary Audio Design Audio CD Player owner manual Rear Panel, 9POWER INPUTAC IN

Rear Panel

9POWER INPUT(AC IN):

*Connect to an AC power supply using the included power supply cord.

10RS 232 JACK

11DIGITAL INPUT JACK ( AES/EBU):

*44.1kHz -192kHz digital data is input to this jack.

12DIGITAL INPUT JACK ( COAXIAL):

*44.1kHz -192kHz digital data is input to this jack.

13DIGITAL INPUT JACK ( TOSLINK):

*44.1kHz -192kHz digital data is input to this jack.

*The pin assignments of ALL of the XLR-type male analog outputs,

the XLR-type male digital output and XLR-type female digital inputs are:

1 2	Pin 1: Signal ground
	Pin 2: Signal + (non-inverting)

3Pin 3: Signal - (inverting)

Connector ground lug: chassis ground

Refer to your amplifier's operating manual to verify that the XLR pin assignments of its input connectors correspond to the CD 306 SACD. If they are different, wire the XLR cable so that the appropriate XLR output pin connects to the equivalent XLR input pin.

2	Pin 1: Signal ground
	1
3	Pin 2: Signal + (non-inverting)

Pin 3: Signal - (inverting)

Connector ground lug: chassis ground

Refer to your digital input source signal player or other digital source's operating manual to verify that the XLR pin assignments of its input connectors correspond to the CD 306 SACD. If they are different, wire the XLR cable so that the appropriate input pin connects to the equivalent input pin.

1 2	Pin 1: Signal ground
	Pin 2: Signal + (non-inverting)

3Pin 3: Signal - (inverting)

Connector ground lug: chassis ground

Refer to your digital source's operating manual to verify that the XLR pin assignments of its input connectors correspond to the CD 306 SACD. If they are different, wire the XLR cable so that the appropriate output pin connects to the equivalent output pin.