Casio 1616 manual Redial, Simultaneous Ringing, Tones and Their Meanings

oThe Mute button light turns off.

oThe call is unmuted and the other person can hear you again.

Redial

To redial a number:

1.From the Phone screen, press the Redial button.

Note: The last number will be redialed or you will see a list of the most recent numbers that you have dialed, from which you can select one to redial.

2.If you see a list of numbers, select the number you want to redial.

3.Press the OK button or the Call softkey.

Simultaneous Ringing

To activate extension to cellular (EC500):

1.Press the EC500 feature button.

oThe Extension to Cellular feature is activated.

oThe green LED next to the feature button turns on.

To deactivate extension to cellular (EC500):

1.Press the EC500 feature button.

oThe Extension to Cellular feature is deactivated.

oThe green LED next to the feature button turns off.

oIf you use a Feature Access Code to enable EC500, the forwarding icon does not appear in the phone display.

Tones and Their Meanings

Ringing tones are produced by an incoming call. Handset tones are those which you hear through the handset.

Ringing Tones

o1 ring - A call from another extension.

o2 rings - A call from outside or from the attendant.

o3 rings - A priority call from another extension, or from an Automatic Callback call you placed.

oring-ping (half ring) - A call redirected from your telephone to another because Send All Calls or Call Forwarding All Calls is active.

Handset Tones

obusy signal - A low-pitched tone repeated 60 times a minute; indicates the number dialed is in use.

ocall waiting ringback tone - A ringback tone with a lower-pitched signal at the end; indicates that the extension called is busy, but the called party has been given a call waiting tone.

ocall waiting tone - One, two, or three beeps of high-pitched tone, not repeated; indicates an incoming call is waiting to be answered. Number of beeps designates the source: 1 for an internal call, 2 for an outside or attendant call, 3 for a priority call.

oconfirmation tone - Three short bursts of tone; indicates a feature activation or cancellation has been accepted. o coverage tone - One short burst of tone; indicates your call will be sent to another extension to be answered by

a covering user.

o dial tone - A continuous tone; indicates dialing can begin.

o intercept/time-out tone - An alternating high and low tone; indicates a dialing error, a denial of the service requested, or a failure to dial within a preset interval (usually 10 seconds) after lifting the handset or dialing the previous digit.

o recall dial tone - Three short bursts of tone followed by a steady dial tone; indicates the feature request has been accepted and dialing can begin.

o reorder tone - A fast busy tone repeated 120 times a minute; indicates all trunks are busy.

o ringback tone - A low-pitched tone repeated 15 times a minute; indicates the telephone dialed is being rung.

1616 IP Telephone End User Guide 18 P a g e