E-24
W (WORK) R (READY)
Receiving
To perform manual receive
1. Place the watch on a stable surface so its 12 o’clock side is facing towards a window (page E-15).
2. In the Timekeeping Mode, hold down Afor about two
seconds until the watch beeps.
3. The digital display will go blank, and the left dial hand
will move to R (READY). This indicates that the watch is
getting ready for time calibration signal reception.
See the information under “Signal Reception Troubleshooting” (page E-27) if you experience problems.
The left dial hand will move to W (WORK) and stay there while actual reception is in progress.
If signal reception is unstable during reception, the left dial hand may move between W (WORK) and
R (READY).
The hour and minute hands continue to keep time normally.