Receive successfulReceive failed

Time calibration signal reception takes from two to seven minutes, but in some cases it can take as long as 14 minutes. Take care that you do not perform any button operations or move the watch during this time.

When a signal receive operation is successful, GET appears on the upper display and the lower display shows the time and date of the successful operation. The watch will adjust its time setting in accordance to with the information provided by the signal.

The watch will return to the Timekeeping Mode if you press A or if you do not perform any operation for about one or two minutes.

ERR will appear on the upper display if the receive

operation is not successful. The watch will not adjust its time setting in this case. Press A to return to the Timekeeping Mode.

E-25