Swapping your Home City and World Time City

You can use the procedure below to swap your Home City and World Time City. This changes your Home City to your World Time City, and your World Time City to your Home City. This capability can come in handy when you frequently travel between two cities in different time zones.

If your current World Time City supports receipt of a time calibration signal, making it your Home City enables calibration signal reception.

For information about which cities support time calibration signal reception, see “To specify your Home City” (page E-12).

To swap your Home City and World Time City

1.In the World Time Mode, use Dto select the World Time City you want.

2.Hold down A and Buntil the watch beeps.

This will make the World Time City you selected in step 1 your Home City, and cause the hour and minute hands to move to the current time in that city. At the same time, it will change the Home City you had selected prior to step 2 your World Time City, and cause the content upper and lower displays to change accordingly.

After swapping the Home City and World Time City, the watch stays in the World Time Mode with the city that was selected as the Home City prior to step 2 now displayed as the World Time City.

E-33