To set an alarm time

1.In the Alarm Mode, use Dto scroll through the alarm screens until the one whose time you want to set is

displayed.

To set a one-time alarm, display alarm screen AL1, AL2, AL3 or AL4. To set the snooze alarm, display the SNZ screen.

SIG is the hourly time signal setting (page E-44).

The snooze alarm repeats every five minutes.

2.After you select an alarm, hold down A for about three seconds until the hour setting of the alarm time starts to flash. This is the setting mode.

This operation turns on the alarm automatically.

3.Press Cto move the flashing between the hour and minute settings.

4.While a setting is flashing, use D(+) and B(–) to change it.

5.Press Ato exit the setting mode.

E-41