To trigger the auto hand home position correction manually

In the Timekeeping Mode, hold down D for about six seconds, until H-SETstarts flashing on the upper display.

Note that H-SETwill appear on the upper display about three seconds after you depress D, but you should not release the button until H-SETstarts flashing. The flashing H-SETindicates that auto hour and minute hand home position correction has started.

Auto hour and minute hand home position correction takes about three and a half minutes to complete. Do not perform any other watch operation during that time.

The watch will return to the Timekeeping Mode automatically after auto correction is complete.

You will not be able to trigger auto correction while the watch is in the Countdown Timer Mode or while a countdown timer operation is in progress.

To interrupt an ongoing auto correction, press D. This will return to the Timekeeping Mode.

E-67