Casio CTK-593, CTK-591 manual Program Change, Effect

					MIDI
PROGRAM CHANGE				*1 The BANK SELECT setting of PROGRAM CHANGE can be used
				to access any of this keyboard’s 255 tones when selecting tones on
This is the tone selection message. PROGRAM CHANGE can				this keyboard from an external machine.
contain tone data within the range of 0 to 127.				Bank 0: 128 General MIDI tones (PROGRAM CHANGE 0 to 127)
A PROGRAM CHANGE message is sent out through this				Bank 1: 118 panel tones (PROGRAM CHANGE 0 to 117)
keyboard’s MIDI OUT terminal whenever you manually				Bank 120: 9 drum sets
change its tone number. Receipt of a PROGRAM CHANGE					(PROGRAM CHANGE 0, 8, 16, 24, 25, 32, 40, 48 and 62)
message from an external machine changes the tone setting
of this keyboard.				Immediately prior to sending the PROGRAM CHANGE message,
				send two successive CONTROL CHANGE messages containing
NOTE				the following data.
				CONTROL NUMBER= 0, CONTROL VALUE= <bank number>
• This keyboard supports 128 tones in the range 0 to 127.				CONTROL NUMBER= 32, CONTROL VALUE= 0
However, Channel 10 is a percussion-only channel, and				Example: To select tone number 96 (panel tone “FLUTE 1”)
Channels 0, 8, 16, 24, 25, 32, 40, 48, and 62 correspond
					from an external MIDI machine.
to the nine drum set sounds of this keyboard.
					CONTROL NUMBER= 0,
					CONTROL VALUE= 1 (bank number)
					CONTROL NUMBER= 32, CONTROL VALUE= 0
					PROGRAM CHANGE= 96
PITCH BEND				*2 RPN stands for Registered Parameter Number, which is a special
This message carries pitch bend information for smoothly				control change number used when combining multiple control
				changes. The parameter being controlled is selected using the
sliding the pitch upwards or downwards during keyboard				control values of control numbers 100 and 101, and then settings
play. This keyboard does not send pitch bend data, but it can				are made using the control values of DATA ENTRY (control
receive such data.				numbers 6 and 38).
				This keyboard uses RPN to control this keyboard’s pitch bend sense
				(pitch change width in accordance with bend data) from another
CONTROL CHANGE				external MIDI device, transpose (this keyboard’s overall tuning
				adjusted in halftone units), and tune (this keyboard’s overall fine
This message adds effects such as vibrato and volume changes				tuning).
applied during keyboard play. CONTROL CHANGE data				NOTE
includes a control number (to identify the effect type) and a
				• Sustain (control number 64), sostenuto (control number
control value (to specify the on/off status and depth of the
effect).				66), and soft (control number 67) effects applied using
The following is a list of data that can be send or received				the foot pedal are also applied.
using CONTROL CHANGE.
		Effect	Control Number
		BANK SELECT*1	0, 32
	★ Modulation		1
	★ Volume		7
	★ Pan		10
	★ Expression		11
		Hold1	64
		Sostenuto	66
		Soft Pedal	67
		RPN*2	100 / 101
		Data Entry	6 / 38
★ indicates receive-only messages

704A-E-059A E-57

CTK591_e_46-58.p65 57 03.10.7, 4:27 PM