Connections
•Before connecting headphones or other external equipment, be sure to first turn down the volume settings of the keyboard and the connected equipment. You can then adjust volume to the desired level after connections are complete.
[Rear Panel]
Audio connection
PHONES/OUTPUT terminal
1
Stereo standard plug
| White | Red PIN plug |
2 | LEFT | RIGHT |
| AUX IN or similar terminal | |
3 Keyboard amp, | of audio amplifier | |
|
| |
guitar amp, etc. |
|
|
Connecting headphones cuts off output from the keyboard’s
Connect the keyboard to an audio equipment using a commercially available connecting cord with a standard plug on one end and two PIN plugs on the other end. Note that the standard plug you connect to the keyboard must be a stereo plug, otherwise you will be able to output only one of stereo channels. In this configuration, you normally set the input selector of the audio equipment to the terminal (usually marked AUX IN or something similar) where the cord from the keyboard is connected. See the user documentation that comes with your audio equipment for full details.
Use a commercially available connecting cord to connect the keyboard to a musical instrument amplifier.
NOTE
•Be sure to use a connecting cord that has a stereo standard plug on the end you connect to the keyboard, and a connector that provides dual channel (left and right) input to the amplifier to which you are connecting. The wrong type of connector at either end can cause one of the stereo channels to be lost.
When connected to a musical instrument amplifier, set the volume of the keyboard to a relatively low level and make output volume adjustments using the amplifier’s controls.
Connection ExamplePIN plug (red) | PIN jack | |
To keyboard’s | INPUT 1 | |
PHONES/OUTPUT | INPUT 2 | |
terminal | ||
| ||
PIN plug (white) | Standard plug Keyboard or | |
Stereo standard plug | ||
| guitar amp |
You can also connect the keyboard to a computer. See “Connecting to a Computer” on page