Casio CTK810, WK110 To record as you play along with a, Lesson Recording Data, built-intune, Selecting a Track, Recording a Performance, Playing Back a Lesson Recording, standby

	Recording and Play Back
To record as you play along with a	Lesson Recording Data
built-in tune	In addition to the notes you play on the keyboard and the
1 Press the SONG BANK button to select the mode	accompaniment of the built-in song you selected, the
	following data is also stored by a lesson recording operation.
that includes the tune you want to play along with.	• Tone setting
	• Tempo setting
Indicator	• Tune name
	• Recording part selection
appears	• Pedal operations
	• Layer and split settings, and their tone settings
	• Effect setting

2Use the RECORDER button to select record standby.

• This causes the RECORDER indicator to flash on the	Playing Back a Lesson Recording
display.
3 Select the tune you want to play along with.	1 Press the SONG BANK button to select the bank of
• See “To play back a Song Bank tune” on page E-22 for	the built-in tune that you originally used to record
information about selecting Song Bank tunes.	the lesson recording.
4 Use the LEFT/TRACK 1 button or RIGHT/TRACK 2	2 Use the RECORDER button to select playback
button to select the part(s) (left-hand, right-hand)	standby.
you want to mute in the built-in tune playback and
	3 Press the controller block START/STOP button.
play along on the keyboard.
• If you want to mute and play both parts, press both	• This starts playback of lesson recording contents.
buttons at the same time.	• You can adjust the tempo at this point, if you want.
5 Configure the following settings as required.	4 To stop playback, press the controller block START/
• Tone (page E-20)	STOP button again.
• Tempo (page E-23)
6 Press the controller block START/STOP button.	Recording a Performance
• This starts recording.	Use this procedure when you want to record what you play
7 Play the notes for the part(s) you selected in step 4	on the keyboard in real time. Performance recording records
	both the notes you play and any accompaniment patterns
on the keyboard.
	that you use.

8Recording stops automatically when playback of

the built-in tune is finished.	Selecting a Track
• To interrupt recording part way through, press the	Press the part/track button that corresponds to the track you
controller block START/STOP button. This will play	want to select.
back everything you recorded up to that point.
• If you want to hear what you recorded immediately,	To select this track:	Press this button:
press the controller block START/STOP button again.	Track 1	LEFT/TRACK 1
	Track 2	RIGHT/TRACK 2
	The track that is currently selected is indicated by the part/
	track indicator (L or R) that appears on the display as
	described below.

E-41