Auto Accompaniment
To use synchro start
1Press the SYNCHRO/ENDING button to put the keyboard into synchro start standby.
Flash
2Playing a chord and the rhythm pattern starts to play automatically.NOTE
•If the MODE switch is set to NORMAL, only the rhythm plays (without a chord) when you play on the accompaniment keyboard.
•If you press the INTRO button before playing anything on the keyboard, the rhythm starts automatically with an intro pattern when you play something on the accompaniment keyboard.
•Pressing the
•To cancel synchro start standby, press the SYNCHRO/ ENDING button one more time.
Finishing with an Ending Pattern
You can end your performances with an ending pattern that brings the rhythm pattern you are using to a
The following procedure describes how to insert an ending pattern. Note that the actual ending pattern played depends on the rhythm pattern you are using.
To finish with an ending pattern
1While the rhythm is playing, press the SYNCHRO/ ENDING button.•This causes the ending pattern to play, which brings rhythm accompaniment to an end.
Using One-touch Preset
•Keyboard tone
•Layer, Split, or Layer Split on/off
•Layered tone (when layer is turned on), split tone (when split is turned on), or layered split tone (when layer and split are turned on)
•Tempo
•Reverb and chorus settings
To use one-touch preset
1Select the rhythm you want to use.2Use the MODE switch to select the accompaniment mode you want to use.3Press the ONE TOUCH PRESET button.•This automatically configures the
4Play a chord. This will cause the rhythm pattern to start to play automatically.
•Accompaniment is played using the one touch preset settings.