Casio CTK810, WK110 Recorded Data Storage, Selecting Parts, Part/Track Indicators in Recording Standby, Recording Play Along with a Builtin Tune, Press this button:

Recording and Play Back

Recorded Data Storage

•Anything previously stored in the keyboard is replaced whenever you make a new recording.

•Recorder contents are retained even when power is turned off, as long as the keyboard is being supplied battery or AC adaptor power. If you remove the batteries or should the batteries go dead while the keyboard is not being supplied power by the AC adaptor, recorder contents will be deleted. Be sure to supply power to the keyboard with the AC adaptor when replacing batteries.

•Turning off the keyboard while a record operation is in progress causes the contents of the track you are currently recording to be lost.

CASIO COMPUTER CO., LTD. assumes no responsibility for any loss or damage to you or any third party arising out of the loss or corruption of data.

Recording Play Along with a Builtin Tune

You can use the lesson recording procedure to record notes you play along with one of the keyboard’s built-in tunes. When you start a lesson recording, the keyboard plays the song minus the part(s) you selected as the recording part(s).

Selecting Parts

Press the part/track button that corresponds to the part(s) you want to select as the recording part(s).

To select this part:	Press this button:
Left-hand	LEFT/TRACK 1
Right-hand	RIGHT/TRACK 2
Both hands	LEFT/TRACK 1 +
	RIGHT/TRACK 2

The part that is currently selected is indicated by the part/ track indicators (L and R) that appear on the display as described below.

Part/Track Indicators in Recording Standby

Press the part/track button of the part you want to play on the keyboard (recording part). This causes its part/track indicator to flash.

Playback part	Recording part
(not displayed)	(flashing)

Example: The above indicates the left-hand part is the playback part, and the right-hand part is the recording part.

E-40