Connection to a Computer

NAVIGATE CHANNEL (Default: 4)

When messages are received from a computer for play on this keyboard, the navigate channel is the channel whose note data appears on the display. You can select one channel from 01 to 16 as the navigate channel. Since this setting lets you use the data on any channel of commercially available SMF data to light on the on-screen keyboard guide, you can analyze how different parts of an arrangement are played.

1Press the TRANSPOSE/SETTING button until the NAVIGATE CHANNEL screen appears.

N a v i . C h

2Use the [+], [–], and the number buttons [0] through[9]to change the channel number.

Example: To specify channel 2

N a v i . C h

To turn off specific sounds before playing back tune data that is being received

<<Navigate channel on/off>>1While playing tune data, press the RIGHT/TRACK 2 button.

•This cuts the sound of the navigate channel, but on- screen keyboard guide keys continue to light in accordance with the channel’s data as it is received. Press RIGHT/TRACK 2 button again to turn the channel back on.

<<Next lower channel from navigate channel on/off>>1 While playing tune data, press the LEFT/TRACK 1 button.

•This cuts the sound of the channel whose number is one less than the navigate channel, but on-screen keyboard guide keys continue to light in accordance

with the channel’s data as it is received. Press LEFT/ TRACK 1 button again to turn the channel back on.

Example: If the navigate channel is channel 4, the above operation turns off channel 3.

LOCAL CONTROL (Default: On)

oFF: Anything played on the keyboard is output as a message from the USB port, without being sounded by the internal sound source.

•Note that no sound is produced by the keyboard if LOCAL CONTROL is turned off and no external device is connected.

1Press the TRANSPOSE/SETTING button until the LOCAL CONTROL screen appears.

Example: When LOCAL CONTROL is on

L o c a l

2Use the [+] and [–] or [0] and [1] buttons to turn the setting on and off.

Example: To turn LOCAL CONTROL off

L o c a l

ACCOMP OUT (Default: Off)

on: Auto Accompaniment is played by the keyboard and the corresponding message is output from the USB port.

oFF: Auto Accompaniment messages are not output from the USB port.

1Press the TRANSPOSE/SETTING button until the ACCOMP OUT screen appears.

Example: When ACCOMP OUT is off

A c o m p O u t

2Use the [+] and [–] or [0] and [1] buttons to turn the setting on and off.

Example: To turn ACCOMP OUT on

A c o m p O u t

E-52