Using Flash (Flash)

1.Press ð (Flash up) to open the flash unit.

•The flash will not fire if the flash unit is not open.

2. In the REC mode, press [2] ( ) once.

Flash

ð (Flash up)

[2] ( )

3.Use [4] and [6] to select the flash setting you want and then press [SET].

> Auto Flash

Flash fires automatically in accordance with exposure

(amount of light and brightness) conditions.

 

?Flash Off Flash does not fire.

Flash always fires. This setting can be used to brighten a

<Flash On subject that normally comes out dark due to daylight or backlight (daylight synchro flash).

¥Red Eye Flash fires automatically. This type of flash can be used to

Reduction reduce the chance of redness in the subject’s eyes.

4.Press the shutter button to shoot.

Back lamp

Flashes red while the flash is charging to indicate that image recording is disabled.

N

< indicates the flash will fire.

• Note that the flash unit does not close automatically. After you are finished using it, you need to close it by hand.

35

Snapshot Tutorial