1.Set the mode dial to × (High-speed CS).

2.Use [8] and [2] to select the second control panel option from the bottom (High-speed CS fps).

3. Use [4] and [6] to select the continuous

 

 

CS speed

shutter (CS) speed you want and then press

 

 

[SET].

 

 

4.Use [8] and [2] to select the bottom control panel option (Prerecord (Still image) Time).

5.Use [4] and [6] to specify how many of the 40 images and for how long images should be pre-recorded in the buffer.

•Prerecord (Still image) shooting is not performed when the number of buffer images and the recording time are both zero.

Number of pre-record images and pre-record time

Shutter button full-press

Number of remaining images and remaining recording time after the shutter button full-press

6.Press [SET].

•The approximate number of recordable CS images will appear on the monitor screen.

Number of recordable CS images (If you are not performing Prerecord CS, the allowable continuous shutter time also is displayed.)

Remaining snapshot memory capacity

7.Half-press the shutter button.

This will cause the camera to start pre-recording images.

•The camera will not emit a shutter sound when you half-press the shutter button while Prerecord (Still image) is selected.

B

52

Snapshot Tutorial