8.Use [4] and [6] to select the subject movement sensitivity, and then press [SET].

•You can select any one of three sensitivity levels: “High”, “Normal”, or “Low”.

•Move Out CS Setting Guide

High: For a subject that moves out of the boundary quickly

Low : For a subject that moves out of the boundary slowly

•Move In CS Setting Guide

High: For a subject that moves into the boundary quickly or for a small subject (relative to the boundary)

Low : For a subject that moves into the boundary slowly or for a large subject (relative to the boundary)

9.Use [8] and [2] to select the second control panel option from the bottom (High-speed CS fps).

10. Use [4] and [6] to select the CS speed setting

CS speed

you want, and then press [SET].

 

•You select a value in the range of 1 frame per second to 40 frames per second for the CS speed.

11.Use [8] and [2] to select the bottom control panel option (Prerecord (Still image) Time).

12.Use [4] and [6] to specify the pre-record time, which is the amount of time before and after subject movement for which you want to record images, and then press [SET].

Number of pre-recorded images and recording time

Auto shutter point

Number of real-time recorded images and recording time

•The approximate number of recordable CS images will appear on the monitor screen.

•The “Number of pre-recorded images and recording time” cannot be set to zero.

Number of recordable CS images

Remaining snapshot memory capacity

B

72

Using BEST SHOT