Shooting an Image in Accordance with Subject Movement (Move Out CS/Move In CS)

You can use these features to shoot an image automatically whenever the subject moves into or moves out of a frame on the monitor screen. You also can configure the camera to record images of what happened immediately before and after the subject moves.

 

Automatically records what happened immediately before and

Move Out CS

after the subject moves outside of a boundary on the monitor

 

screen.

Move In CS

Automatically records what happened immediately before and

after the subject moves into a boundary on the monitor screen.

 

 

 

.To setup the camera

1.Set the mode dial to t (Single Shot), × (High-speed CS), or ª (Flash

CS).

2.Press [BS].

3.Select “Move Out CS” or “Move In CS”.

4.Press [SET].

5.Configure the boundary location and size settings.

[8] [2] [4] [6] Moves the boundary.

Zoom controller Resizes the boundary.

6. Press [SET].

Boundary

•If you want to reconfigure the settings, start again from step 4.

7.Use [8] and [2] to select the third control panel option from the bottom (Trigger Sense).

71

Using BEST SHOT