Adding Audio to a Snapshot (Dubbing)

Procedure

[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Dubbing

You can add audio to a snapshot after you shoot it.

 

 

You can re-record a snapshot’s audio whenever you

 

 

 

 

want. You can record up to about 30 seconds of audio

 

 

for a single snapshot.

 

 

1.

Press [SET] to start audio recording.

 

 

 

 

 

 

 

 

Remaining recording time

 

 

 

 

2.

Press [SET] again to stop audio recording.

Microphone

• Take care that you do not block the camera’s microphone with your fingers while recording.

• Good recording results are not possible when the camera is too far away from what you are trying to record.

•Your camera supports the following audio data formats.

–Audio Format: WAVE/IMA-ADPCM (WAV extension)

•Adding audio (dubbing) is not possible for the following types of images.

–Images created using MOTION PRINT

–Protected images

•To delete audio, perform the following operation: Dubbing * Delete * [SET] * [MENU].

IMPORTANT!

•Note that you cannot restore the original audio of an Audio Snapshot after you delete or re-record it.

To play snapshot audio

1.In the PLAY mode, use [4] and [6] to scroll through the images until the Audio Snapshot you want is displayed.

An audio snapshot is one that has a ˆ icon.

2.Press [SET] to start playback.

103Other Playback Functions (PLAY)