Inserting a Subject into a Background Image (Dynamic Photo)
Use the following procedure to insert a subject into a new background image. A Dynamic Photo with a moving subject is saved as a 2M (1600x1200 pixels) or smaller size image. A Dynamic Photo with a still subject is saved as a 6M (2816x2112 pixels) or smaller size image.
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Dynamic Photo
1.Use [4] and [6] to select the background image you want and then press [SET].
•Only an image that satisfies the following conditions can be used as a background image.
–An image recorded with this camera or an image transferred to this camera’s memory using Photo Transport (page 123)
–An image with an aspect ratio of 4:3
2.Use [4] and [6] to select the subject image you want to insert and then press [SET].
3.Use the zoom controller to adjust the size of the subject and use [8], [2], [4], and [6] to adjust its position.
4.When everything is the way you want, press [SET].
This inserts the subject into the background image and creates a Dynamic Photo.
•If the original still image into which a moving subject is inserted is smaller than 2M size, the Dynamic Photo will be the same size as the original.
•If the original still image into which a still subject is inserted is smaller than 6M size, the Dynamic Photo will be the same size as the original.
107 | Dynamic Photo |
|