Snapshot Tutorial
Using the Control Panel
The Control Panel can be used to configure camera settings.
1.In the REC mode, press [SET].
This will select one of the Control Panel icons and display its settings.
[8] [2] [4] [6] | Available settings Control Panel |
| 1 |
| 2 |
| 3 |
| 4 |
| 5 |
| 6 |
| 7 |
[SET] | 8 |
9 |
2.Use [8] and [2] to select the setting you want to change.
1Image size/Quality* (pages 29, 76) | 7Face |
2Flash (page 32) | (pages 39, 44, 45) |
3AF Area (page 34) | 8EV shift (page 41) |
4Lighting (page 35) | 9Date/Time (page 42) |
5ISO sensitivity (page 36) |
|
6Continuous shutter (page 37) |
|
*Snapshot image quality cannot be changed using the Control Panel.
3.Use [4] and [6] to change the setting.
4.If you want to configure another setting, repeat steps 2 and 3.
5.After all of the settings are the way you want, press [SET]. This will apply the settings and return to the REC mode.
NOTE
•You also can configure settings other than those listed above (page 60).
•The Control Panel cannot be displayed while a Dynamic Photo, For YouTube, or Voice Recording Operation is in progress.
28 | Snapshot Tutorial |
|