Using the Dynamic Photo Extracted Sample Subjects

Your digital camera comes with a number of extracted sample subjects in its built-in memory. You can use these sample subjects to practice creating Dynamic Photo images by inserting them into your original snapshots.

Step 1: Shoot the snapshot into which you want to insert an

extracted sample subject.

1.Remove the memory card from the camera (if one is loaded).

You will not be able to access the extracted sample subjects in built-in camera memory while a memory card is loaded in the camera.

2.In the REC mode, compose the image and press the shutter button to shoot a standard snapshot.

You will insert the extracted sample subject into the snapshot you shoot here.

Step 2: Perform the following procedure to create a Dynamic

Photo image.

1.Press [p] to enter the PLAY mode.

2.Perform the following operation on the camera [MENU] * PLAY tab * “Dynamic Photo”.

3.Use [4] and [6] to select the snapshot you shot in Step 1 above, and then press [SET].

4.Use [4] and [6] to select the extracted sample subject in built-in camera memory that you want to insert into the snapshot and then press [SET].

5.Use the zoom controller to adjust the size of the subject and use [8], [2], [4], and [6] to adjust its position. When everything is the way you want, press [SET].

This inserts the extracted sample subject into the snapshot and creates a Dynamic Photo image.

B

3

Using the Dynamic Photo Extracted Sample Subjects