NOTE

•Only Camera Stabilizer can be used during movie recording.

•ISO sensitivity, aperture, and shutter speed do not appear on the monitor screen when you half-press the shutter button while “D Auto” or “S Image AS” is selected. These values will appear briefly, however, in the preview image that is displayed immediately after you shoot a snapshot.

•The ISO sensitivity setting (page 36) must be “AUTO” for “S Image AS” to work.

•Shooting while “D Auto” or “S Image AS” is selected can cause an image to appear somewhat coarser than normal and can cause slight deterioration of image resolution.

•Anti Shake may not be able to eliminate the effects of camera or subject movement when movement is severe.

•“A Camera AS” may not work properly when the camera is mounted on a tripod. Either turn off Anti Shake or select “S Image AS”.

Specifying the Auto Focus Area (AF Area)

Procedure

[r] (REC) * [MENU] * REC Tab * AF Area

For details, see the Control Panel procedure on page 34.

Using the Auto Focus Assist Light (AF Assist Light)

Procedure

[r] (REC) * [MENU] * REC Tab * AF Assist Light

Half-pressing the shutter button while this setting is selected

Front lamp

causes the front lamp to light, which provides illumination for

 

focusing in areas where lighting is dim. Leaving this function

 

turned off is recommended when shoot portraits from short

 

distances, etc.

 

IMPORTANT!

• Never look directly into the front lamp while it is lit.

71

Advanced Settings