67

OTHER RECORDING FUNCTIONS

NOTE

• The initial default setting is “REC Mode”.

When you want to assign this function to
[] and [] keys:
Recording mode
•[] and [] cycle through recording
modes: Snapshot, Best Shot, Movie
(page 142).
Flash mode
•[] and [] cycle through the flash
mode settings (page 45).
EV shift
•[] decreases compensation, []
increases compensation (page 51).
White balance setting
•[] and [] cycle through white
balance settings (page 52).
ISO sensitivity
•[] and [] cycle through sensitivity
settings (page 65).
No function assigned
Select this:
REC Mode
Flash
EV Shift
White Balance
ISO
Off
Assigning Functions to the [] and []Keys

A “key customization” feature lets you configure the []

and [] keys so they change camera settings whenever

they are pressed in the REC mode. After you configure the

[] and [] keys, you can change the setting assigned to

them without going through the menu screen.

1.
In the REC mode, press [MENU].
2.

Select the “REC” tab, select “U/D Key”, and

then press [].
3.

Use [] and [] to select the setting you

want, and then press [SET].