FILE MANAGEMENT

6.Load paper for printing the images into the printer.

7.Configure print quality, paper, and other settings for your printer.

See the user documentation that comes with your printer for details about configuring its settings.

8.On the camera’s monitor screen, use [ ] and

[ ] to select “Print”, and then press [SET].

This automatically starts printing of the images you specified with the DPOF procedure.

If you want to print the same batch of images again, press the [USB] button on the USB cradle.

A message appears on the monitor screen, followed by the DPOF setting screen (page 87), if there are no DPOF settings currently configured on the camera to control the printing operation. If this happens, configure the required DPOF settings and then perform step 6 of the above procedure again.

If you want to change the current DPOF settings, select “DPOF” on the print menu to display the DPOF setting screen (page 87).

9.After printing is complete, turn off the camera and remove it from the USB cradle.

IMPORTANT!

Contact your printer manufacturer for information about models that support USB DIRECT-PRINT, upgrades, etc.

Never disconnect the USB cable, or perform any camera or USB cradle operation while printing is in progress. Doing so causes a printer error.

To interrupt an ongoing print operation, perform the required operation on the printer.

92

Page 92
Image 92
Casio EX-S3 manual File Management