OTHER SETTINGS

IMPORTANT!

You can select any one of the following types of image as the startup image.

The camera’s built-in startup image

A snapshot you recorded with the camera

A movie you recorded with the camera two seconds or less in length and 200KB or less in size

The snapshot image or movie that you select as the startup image is stored in a special memory location called “startup image memory”. Only one image can be stored in startup image memory at one time.

Selecting a new startup image overwrites anything that is already stored in startup image memory. Because of this, if you want to return to a previous startup image, you need to have a separate copy of that image in the camera’s standard image memory. Note that you cannot delete an image from startup image memory. You can only replace it with another image.

Specifying the File Name Serial Number Generation Method

Use the following procedure to specify the method for generating the serial number used for file names (page 85).

1.In the REC mode or the PLAY mode, press [MENU].

2.Select the “Set Up” tab, select “File No.”, and then press [ ].

3.Use [ ] and [ ] to change the setting, and then press [SET].

98

Page 98
Image 98
Casio EX-S3 manual Specifying the File Name Serial Number Generation Method