
camera.
• Take care that you do not touch the lens when sliding the lens cover.
2. Align the mode dial with “ ” (Snapshot). This causes “ ” to appear on the monitor screen.
• If “ ” (PLAY Mode) is on the monitor screen, make
sure that the lens cover is open and then press the shutter button or [ ] (PLAY). This will switch to the currently selected REC Mode.
3. Point the camera at the subject.
4. While taking care to keep the camera still, half- press the shutter button.
When the image is in focus, the camera will beep, the operation lamp will light green, and the focus frame will turn green.
QUICK START BASICS
Slide open the lens cover to turn on the
1.
(page 56)
Shooting a Snapshot
Shutter Button
Lens Cover
Snapshot icon
136
2N
07/12/24 | Operation Lamp |
12:37 |
|
Focus Frame
Monitor Screen
Mode dial
15