1.In a REC mode, press [MENU].
2.On the “Quality” tab, select “Flash Assist” and then press [X].
3.Use [S] and [T] to select “Off” and then press
[SET].
When you want to use flash assist, select “Auto” here.
IMPORTANT!
•Flash assist may not produce the desired result for some types of subjects.
•Any of the following can result in the flash assist effect being canceled out.
–Changing the flash intensity (page 75)
–Correcting brightness (EV shift) (page 126)
–Changing ISO sensitivity (page 131)
–Changing the contrast setting (page 136)
■Flash Precautions
•The desired effect may not be obtained when the subject is too far away or too close.
•Flash charging time depends on operating conditions (battery condition, ambient temperature, etc.) With a fully charged battery, it takes anywhere from a few seconds to 7 seconds.
•Shooting with flash turned off when lighting is dim results in a slow shutter speed, which can cause image blur due to hand movement. Secure the camera with a tripod, etc.
•The presence of outdoor sunlight, fluorescent lighting, or some other light source can cause abnormal image colors.
76
SHOOTING A SNAPSHOT