■Re-recording Snapshot Audio

IMPORTANT!

•Note that you cannot restore the original audio once you delete or re-record the audio of a snapshot.

1.In the PLAY mode, use [W] and [X] to scroll through images and display the snapshot whose audio you want to re-record.

2.Press [MENU].

3.On the “PLAY” tab, select “Dubbing” and then press [X].

4.Use [S] and [T] to select “Delete” and then press [SET].

•If you just want to delete the audio of the snapshot without re-recording anything, press [MENU] here and skip the rest of this procedure.

5.Press [SET] to start audio recording.

This deletes the previous recording and replaces it with the new one.

6.Press [SET] again to stop audio recording.

Recording will stop automatically after about 30 seconds if you do not press [SET].

NOTE

•Your camera supports the following audio data formats.

–Audio Format: WAVE/ADPCM (.WAV extension)

–Approximate Audio File Size: 165KB (30-second recording at 5.5KB per second)

•See page 83 for recording precautions.

180

USING AUDIO