•Normally, the initially selected white balance setting on the above menu is the one that was used when you originally recorded the image. If you used the “Auto” or “Manual” white balance setting when you recorded the image, “Cancel” will be selected (page 129).
•If you select the same white balance setting as the one you selected when you originally recorded the image, pressing [SET] will exit the white balance adjustment menu without changing the image.
IMPORTANT!
•Adjusting the white balance of an image creates a new image with the new white balance setting. The original image also remains in memory.
•When you display an image whose white balance has been adjusted on the camera’s monitor screen, the date and time indicates when the image was originally recorded, not when the white balance was adjusted.
Adjusting Image Brightness
Use the following procedure to adjust the brightness of snapshots.
1.In the PLAY mode, use [W] and [X] to scroll through images and display the one whose brightness you want to adjust.
2.Press [MENU].
3.Select the “PLAY” tab, select “Brightness”, and then press [X].
•Note that the above step is possible only when there is a snapshot displayed on the monitor screen.
171
EDITING IMAGES