USING AUDIO

Adding Audio to a Snapshot

The dubbing feature of your camera lets you add audio to a snapshot after you shoot it. A snapshot that includes audio (regardless of whether the audio was recorded on the spot or

added later) is indicated by the “

 

” icon.

You can re-record a snapshot’s audio whenever you want.

You can record up to about 30 seconds of audio for a snapshot.

•Audio is monaural.

1.In the PLAY mode, use [W] and [X] to scroll through images and display the snapshot to which you want to add audio.

2.Press [MENU].

3.On the “PLAY” tab, select “Dubbing” and then press [X].

•This operation can be performed only while a snapshot is on the monitor screen.

4.Press [SET] to start audio recording.

5.Press [SET] again to stop audio recording.

Recording will stop automatically after about 30 seconds if you do not press [SET].

To play back snapshot audio

Perform the steps under “Listening to the Audio of an Audio Snapshot” on page 147.

179

USING AUDIO