
.
Checking a Snapshot
A snapshot will remain on the monitor screen for a short while after you shoot it and then disappear when the camera gets ready for the next image.
Perform the following operation to view a snapshot after you shoot it.
Press [ ].
This will display the snapshot you just shot.
Use [W] and [X] to scroll through other images in memory.
To return to a REC mode
You can enter a REC Mode by performing any one of the following operations.
–Press the shutter button.
–Align the mode dial with the desired REC mode.
–Press [ ] (PLAY) (with the lens cover open).
■Fully pressing the shutter button without waiting for Auto Focus
•You can shoot snapshots by pressing the shutter button all the way without waiting for Auto Focus. What the camera does in this case depends on whether Quick Shutter (page
120)is on or off.
When Quick Shutter is turned on
•Some images may be out of focus when Quick Shutter is used.
•Quick Shutter is turned on as the initial factory default setting.
When Quick Shutter is turned off
Normal Auto Focus is performed and then the image is recorded.
•If you keep the shutter button depressed, images will continue to be shot without focus.
•Whenever possible, take a little extra time to
61
SHOOTING A SNAPSHOT