| Problem | Possible Causes and Action |
|
| An image I shot was not | 1) Camera power may have been turned off before the save operation was complete, which will result in | |
| saved. | the image not being saved. When the battery indicator shows “ | ”, charge the battery as soon as |
|
| possible (page 36). |
|
2)You may have removed the memory card from the camera before the save operation was complete, which will result in the image not being saved. Do not remove the memory card before the save operation is complete.
Though available lighting is | Not enough light is reaching the subjects. Change the flash mode setting to “ |
| ” (Flash On) for daylight | |||
bright, the faces of people in | synchro flash (page 72), or use adjust EV shift to the + side (page 126). |
|
| |||
the image are dark. |
|
|
|
|
|
|
|
|
|
| |||
Subjects are too bright when | Sunlight reflected by water, sand, or snow, can cause underexposure of images. Change the flash mode | |||||
shooting images in a | setting to “ |
| ” (Flash On) for daylight synchro flash (page 72), or use adjust EV shift to the + side (page | |||
seashore or ski area. | 126). |
|
|
|
| |
|
|
|
|
| ||
Digital zoom does not work. | 1) | Using digital zoom while Layout Shot, Auto Framing, Old Photo, or certain other BEST SHOT scenes | ||||
The zoom bar indicates zoom |
| are selected causes deterioration of the image. |
|
| ||
only up to a zoom factor of | 2) | Time stamping may be turned on, which will cause digital zoom to be disabled. Turn off time stamping | ||||
7.0. |
| (page 137). |
|
|
| |
|
|
|
|
| ||
The image is out of focus | 1) | Focusing is not possible because the subject is outside the focus range. Shoot within the allowable | ||||
during movie recording. |
| range. |
|
|
| |
| 2) | The subject you are shooting may be difficult to focus (page 68). |
|
| ||
| 3) | The lens may be dirty. Clean the lens (page 35). |
|
| ||
263
APPENDIX