PLAYBACK
Cropping an Image
You can use the following procedure to crop a portion of an enlarged image.
1.In the PLAY mode, use [] and [] to scroll through images and display the one you want to crop.
2.Press [MENU].
3.Select the “PLAY” tab, select
“Trimming”, and then press [].
•This causes a cropping boundary to appear.
•Note that this operation is possible only when a snapshot image is on the monitor screen.
4.Use the zoom button (
) to make the cropping boundary larger or smaller.
•The smaller the image, the more limited is the size of the cropping boundary.
5.Use [], [], [], and [] to move the cropping boundary up, down, left, or right until the area of the image you want to extract is within the boundary.
6.Press [SET] to extract the part of the image enclosed in the cropping boundary.
•If you want to cancel the procedure at any point, press [MENU].
113