OTHER SETTINGS
Specifying the File Name Serial Number Generation Method
Use the following procedure to specify the method for generating the serial number used for file names (page 127).
1.Press [MENU].
2.Select the “Set Up” tab, select “File No.”, and then press [].
3.Use [] and [] to change the setting, and then press [SET].
To do this for a newly saved file: | Select this setting: | |
|
| |
Store the last file number used and |
| |
increment it, regardless of whether |
| |
files are deleted or whether the | Continue | |
memory card is replaced with a new |
| |
one |
| |
|
| |
Find the highest file number in the | Reset | |
current folder and increment it | ||
| ||
|
|
Using the Alarm
You can configure up to three alarms that cause the camera to beep and display a specified image at the time you specify. Specifying a movie or an audio snapshot plays back the image and the audio at the assigned time. Specifying a voice recording file plays the audio.
•You can configure up to three alarms, named “Alarm 1”, “Alarm 2”, and “Alarm 3”.
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “Alarm”, and then press [].
3.Use [] and [] to select the alarm (1, 2, or 3)
whose setting you want to configure, and then press [].
4.Use [] and [] to select the setting you want to change, and then use [] and [] to change the selected setting.
•You can set an alarm time and configure the alarm to sound only once (Once) or at the same time everyday (Daily). You can also turn the alarm on or off.
137