OTHER SETTINGS
Configuring [
] (REC) and [
] (PLAY) Power On/Off Functions
You can use the following procedures to configure the [
] (REC) and [
] (PLAY) so power turns and/or off whenever they are pressed.
1.Press [MENU].
2.Select the “Set Up” tab, select “REC/PLAY”, and then press [].
3.Use [] and [] to select the setting you want, and then press [SET].
To configure this operation: | Select this setting: | |
Power turns on when [ ] (REC) or |
| |
[ ] (PLAY) is pressed (but does not | Power On | |
turn off) |
| |
|
| |
Power turns on or off when [ ] | Power On/Off | |
(REC) or [ ] (PLAY) is pressed | ||
|
Power does not turn on or off when
[
] (REC) or [
] (PLAY) isDisable pressed
IMPORTANT! 
•When “Power On/Off” is selected, pressing [
] (REC) in a REC mode or [
] (PLAY) in the PLAY mode turns off the camera.
•Pressing [
] (REC) in the PLAY mode switches to the currently selected recording mode, and pressing
[
] (PLAY) in a REC mode switches to the PLAY mode.
NOTE 
•The initial default setting is “Power On”.
144