GETTING READY

NOTE

•The AC adaptor is designed for operation on power ranging from 100V AC to 240V AC. Note, however, that the shape of the power cord plug varies according to country or geographic area. It is up to you to find out if the shape of the AC adaptor power cord plug is compatible with local power outlets when traveling abroad.

2.Turn off the camera.

3.Set the camera onto

the USB cradle.

• Do not place the camera onto the USB cradle while it is turned on.

• The [CHARGE] lamp

 

on the USB cradle

 

should turn red,

 

indicating that charging

 

has started. When

 

charging is complete,

 

the [CHARGE] lamp

[CHARGE] lamp

will turn green.

 

•It takes about 190 minutes to achieve a full charge. Actual charging time depends on current battery capacity and charging conditions.

4.After charging is complete, remove the camera from the USB cradle.

IMPORTANT!

•Use only the USB cradle (CA-24) that comes with the camera or the optionally available rapid charger (BC- 30L) to charge the special NP-40 rechargeable lithium ion battery. Never use any other charging device.

•Use only the bundled AC adaptor. Never use any other type of AC adaptor. Do not use optionally available AD-C40, AD-C620 and AD-C630 AC adaptors with this camera.

•Make sure that the camera connector of the USB cradle is securely inserted into the camera’s connector as far as it will go.

32