OTHER SETTINGS
5.Press [DISP].
•You could press [SET] in place of [DISP] if you want to configure the alarm without an image.
6.Use [] and [] to select the scene you want to appear at the alarm time, and then press [SET].
7.After all the settings are the way you want, press [SET].
NOTE 
•When an alarm time is reached while the camera is turned off, the alarm will sound for about one minute (or until you stop it), and then the camera will turn on. To stop the alarm after it starts to sound, press any button. If the camera is on the USB cradle when an alarm sounds, you can stop it by pressing the USB cradle [USB] button or [PHOTO] button, or any camera button.
IMPORTANT! 
•Note that the alarm does not sound if the alarm time is reached when any one of the following conditions exists.
—While the camera is turned on
—While a USB data communication operation is in progress
—While a Photo Stand operation is in progress
138