APPENDIX
| Symptom |
| Possible Cause |
| Action |
|
|
|
| ||
| Color of the playback | Sunlight or light from another source is shining | Position the camera so sunlight does not shine | ||
| image is different from the | directly into the lens during recording. | directly into the lens. | ||
Playback | image on the monitor | A memory card with | This camera cannot display | ||
Images are not displayed. | |||||
| screen during recording. |
|
|
|
|
|
| with another camera is loaded in the camera. | recorded onto a memory card using another digital | ||
|
|
|
| camera. | |
|
|
|
| ||
| All buttons and switches | Circuit problem caused by electrostatic charge, | Remove the battery from the camera, reinsert it, | ||
| are disabled. | impact, etc. while the camera was connected to | and then try again. | ||
|
| another device. |
|
| |
|
|
|
|
|
|
| Monitor screen is off. | 1) | USB communication is in progress. | 1) | After the computer stops accessing camera file |
|
|
|
|
| memory, press the [USB] button on the USB |
Other |
|
|
|
| cradle. Check to make sure that the [USB] lamp |
|
|
|
| on the USB cradle is off, and then remove the | |
|
|
|
|
| |
|
|
|
|
| camera from the USB cradle. |
|
| 2) | The monitor screen is turned off (in a REC | 2) | Press [DISP] to turn on the monitor screen. |
|
|
| mode). |
|
|
|
|
|
|
|
|
| Cannot transfer files over a | 1) | Camera is not set securely on the USB cradle. | 1) | Check the connection between the camera and |
| USB connection. |
|
|
| USB cradle. |
|
| 2) | USB cable is not connected securely. | 2) | Check all connections. |
|
| 3) | USB driver is not installed. | 3) | Install the USB driver on your computer (page |
|
|
|
|
| 160). |
|
| 4) | Camera is turned off. | 4) | Press the [USB] button on the USB cradle. |
|
|
|
|
|
|
200