■Creating Your Own BEST SHOT Scenes

You can use the procedure below to save the setups of snapshots that you shot as BEST SHOT scenes. After that, you can recall a setup whenever you want to use it.

1.In the REC mode, press [BS].

2.Use [S], [T], [W], and [X] to select “BEST

SHOT” (Register User Scene) and then press [SET].

3.Use [W] and [X] to select the snapshot whose setup you want to register.

4.Use [S] and [T] to select “Save” and then

press [SET].

Your BEST SHOT scene will be assigned the name “Recall User Scene”, along with a scene number.

IMPORTANT!

•Formatting the camera’s built-in memory (page 200) deletes all the user BEST SHOT scene files.

NOTE

•You can check the settings of the currently selected BEST SHOT scene by displaying the camera’s setting menus and looking at its settings.

•User scenes are assigned numbers in the sequence: U1, U2, and so on.

•The following are the settings that are included in a user scenes:

Face Recognition, Focus, EV Shift, White Balance, Flash, ISO, Metering, Flash Intensity, Flash Assist, Color Filter, Sharpness, Saturation, Contrast

•You can store up to 999 BEST SHOT user scenes.

•User snapshot scenes are stored in camera built-in memory in the folder named “SCENE” (page 238).

101

USING BEST SHOT