Using the easy Mode

The easy mode eliminates troublesome setups. This mode is recommended for those who are new to digital imaging.

1.In the REC mode, press [SET].

2.Use [S] and [T] to select the second option from the bottom in the operation panel (easy mode).

3.Use [W] and [X] to select “ ON” and then

press [SET].

This enters the easy mode.

4.Focus the image.

While the focus frame is aligned with the subject, half-press the shutter button.

5.Shoot the image.

When the image is focused, press the shutter button the rest of the way.

■Using the easy Menu

The easy menu contains flash, self-timer, and image size settings, plus an item for exiting the easy mode.

While the camera is in the easy mode, all the other settings

(besides Self-timer, Image Size, and easy Mode) on the REC tab menu (page 246) and Quality tab menu (page 247) are fixed at preset optimum values. Any settings you configured on these tabs are not used in the easy mode.

IMPORTANT!

•To use the Set Up tab menu (page 248), you need to exit the easy mode. To do this, select the “easy Mode” item in

step 2 of the following procedure, and then select in step 3. After that, you can use the Setup tab menu as you

normally do.

65

SHOOTING A SNAPSHOT