Date Stamping Snapshots
You can have the snapshot’s recording date only, or date and time stamped in the lower right corner of the image.
1.In the REC mode, press [MENU].
2.On the “Set Up” tab, select “Timestamp” and then press [X].
3.Use [S] and [T] to select the setting you want and then press [SET].
Example: December 24, 2007, 1:25 p.m.
IMPORTANT!
• Even if you do not stamp the date and/or time with |
Timestamp, you can do so later using the DPOF function |
and the printing software function (page 208). |
• Once date and time information is stamped in a print, it |
cannot be edited or deleted. |
• Use the “Date Style” setting (page 194) to specify the Year/ |
Month/Day format of the date. |
• The recording date and time are determined in accordance |
with the camera’s clock settings (pages 11, 193) when the |
snapshot is recorded. |
• Digital zoom is not supported while date stamping is turned |
To do this:
Select this setting:
on. |
• Date stamping is not supported for the following types of |
images. |
Display the date only (2007/12/24) | Date |
Display the date and time (2007/12/24
– Some BEST SHOT images (Auto Framing, Business |
cards and documents, White board, etc., Old Photo, ID |
1:25pm)
Date&Time
Photo) |
Display nothing | Off |
135
ADVANCED SETTINGS