4.Press the shutter button again to stop
shooting.
Each movie can be up to 10 minutes long. Movie recording stops automatically after 10 minutes of recording. Movie recording also will stop automatically if memory becomes full before you stop movie recording by pressing the shutter button.
Anti Shake Movie Recording
Turning on Anti Shake for movie recording causes the view angle to become smaller. Anti Shake reduces the effects of hand movement only. It does not limit the effects of subject movement (page 102).
Movie Recording Precautions
•You cannot use flash while shooting a movie.
•The camera also records audio. Note the following points when shooting a movie.
– Take care that the microphone | Microphone |
is not blocked by your fingers, |
|
etc. |
|
–Good results are not possible when the camera is too far
away from what you are trying to record.
–Operating camera buttons while shooting can cause button noise to be picked up in the audio.
•Shooting a very bright subject can cause a vertical band to appear in the monitor screen image. This does not indicate malfunction. The band will be recorded in the case of a movie.
•Certain types of memory cards take longer to record data,
which can cause movie frames to be dropped. “ 
” and
“
” flash on the monitor screen during recording to let you know when a frame has been dropped. Use of a memory card
with a maximum transfer speed of at least 10MB per second is recommended.
92
SHOOTING A MOVIE