7.Use [W] and [X] to select the snapshot for the layout and then press [SET].
8.Repeat steps 6 and 7 for all of the other frames in the layout.
The final layout image will be saved after you insert the final snapshot into it.
•Pressing [MENU] returns to the PLAY mode screen without saving the layout image.
•You will not be able to save the new image unless there is a snapshot in all of the layout frames.
IMPORTANT!
•Layout Print is not supported when the image size is “3:2 (3072 × 2048 pixels)” or “16:9 (3072 × 1728 pixels)”.
•When you display a layout image on the camera’s monitor screen, the date and time indicates when the last image added to the layout was originally recorded, not when the image was laid out.
•The size of the
Adjusting White Balance of a
Recorded Image
You can use the white balance setting to select a light source type for a recorded image, which will affect the colors of the image.
1.In the PLAY mode, use [W] and [X] to display the image whose white balance setting you want to change.
2.Press [MENU].
3.Select the “PLAY” tab, select “White Balance”, and then press [X].
•Note that the above step is possible only when there is a snapshot displayed on the monitor screen.
167
EDITING IMAGES