Zooming an On-screen Image

1.In the PLAY mode, use [4] and [6] to scroll through the images until the one you want is displayed.

2. Slide the zoom controller towards z ([) to

Zoom factor

zoom.

Image area

 

 

You can use [8], [2], [4], and [6] to scroll the zoomed

 

image on the monitor screen. Slide the zoom controller

 

 

 

 

towards w to unzoom the image.

 

 

 

 

– When monitor screen contents are turned on, a

 

 

 

 

graphic in the lower right corner of the screen

 

 

 

 

shows what part of the zoomed image is currently

 

 

 

 

 

 

 

 

displayed.

 

 

 

 

– To exit the zoom screen, press [MENU].

 

 

 

 

 

 

 

 

– Though the maximum image zoom factor is 8X,

 

 

 

 

Current display area

certain image sizes may not allow zooming up to

 

 

 

 

the full 8X.

 

 

 

 

•Pressing [SET] will lock the current zoom factor for the on-screen image. You can then use [4] and [6] to scroll between images, using the same zoom factor. Pressing [SET] again will unlock the zoom factor and allow you to use [8], [2], [4] and [6] to move around the currently displayed images. This function cannot be used while viewing CS group images or movies. Also, CS group images and movies will not appear when you are scrolling images with [4] and [6].

Displaying the Image Menu

1. In the PLAY mode, slide the zoom controller

Boundary

towards w (]).

 

 

 

 

Use [8], [2], [4] and [6] to move the selection boundary around the image menu.

To view a particular image, use [8], [2], [4], or [6] to move the selection boundary to the image you want and then press [SET].

•In the case of a movie or a continuous shutter (CS) file, the first frame of the file will be displayed.

111

Viewing Snapshots and Movies