Using Prerecord Movie (Prerecord (Movie))

With Prerecord Movie, the camera continually updates a buffer that stores up to five seconds of movie images. This lets you record a move that contains what happened five seconds before you started recording, followed by real-time recording. Pressing [0] (Movie) saves the pre-recorded action (buffer contents) followed by real-time recording. Real-time recording continues until you stop it. Prerecord Movie can be used when shooting a standard (STD) movie, a high-definition (FHD) movie, or a high speed (HS) movie.

•When using Prerecord Movie in combination with high speed movie, the buffer will store two seconds of pre-recording instead of the usual five.

 

[0] (Movie)

[0] (Movie)

 

 

 

Movie

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Real-time recording start

Real-time recording end

 

 

 

 

 

 

5-second prerecorded part (from the buffer)

*Approximately two seconds for high speed movie

.To set up the camera to shoot with Prerecord Movie

1.In the REC mode, press [MENU].

2.Use [4] and [6] to select the “Quality” tab.

3.Use [8] and [2] to select “» Quality” and then press [6].

4.Use [8] and [2] to select the movie mode you want to use for shooting.

5.Press [SET].

6.Press [BS] (BEST SHOT).

7.Use [8], [2], [4], and [6] to select the “Prerecord (Movie)” scene and then press [SET].

This causes ‰ (Prerecord (Movie)) to appear on the monitor screen, indicating that the camera is prerecording to its buffer.

66

Recording Movies